Advice On Tomato Testing And Nutrition

Mixed Grape Tomatoes

“If you’re going to mess up a crop, it’s tomatoes. They’re like the canary in the coal mine.”

Those were the opening words of Steve Bogash, regional horticultural educator at Penn State University, to a roomful of growers at the Ohio Produce Growers & Marketers Association Congress in January.

Bogash has produced more than 300 tomato varieties in trials. In spite of his opening comments, Bogash has met with many successes in tomato production and said that one of the best varieties he has worked with is BrandyBoy from Burpee Seeds.

“The flavor of this tomato is tremendous,” he said. In addition, “Rather than getting three to five fruit before disease sets in, as is the case with the variety’s parent, BrandyWine, BrandyBoy is a hybrid that produces a lot of tomatoes long term, due to high resistance qualities and the ability to grow multiple fruit per cluster.”

Those successes are not without difficulties, however, as blossom end rot, yellow shoulders, uneven ripening, and radial cracking have occurred on Brandyboy and any tomato that does not receive proper nutrition.

 

Planning for Success

In order to maximize success producing virtually any variety of tomato, Bogash presented some guidelines growers should follow.

1). First, he said, is to use varieties with disease-resistant qualities. Bogash has had success with BHN 589 (BHN Seed Co.), Scarlet Red (Harris Moran Seed Co.), and the previously mentioned BrandyBoy. Noting that there are many other good tomatoes on the market, Bogash said these varieties are the ones that he has had the most success with to date.

2). Growers should also be aware of what to test and when. “You have to test regularly,” he emphasized, “and know your soil or potting media.”

Bogash told the audience to test soil before planting, again at the onset of heavy flowering, and a final time at the first and second stage of green fruit. Testing at all stages of growth is necessary to monitor nutrient removal.

“Tissue testing should also be done at the onset of flowering and every two weeks thereafter in order to monitor nutrient uptake,” he explained. This will help growers understand how to adjust their fertility programs to ensure optimal growth.

Growers should then continue testing every two weeks until the last fruit has sized up. When taking tissue tests, Bogash said growers should be sure to test the correct plant parts. These include collecting 12 to 15 of the most recently mature leaves including the petiole. He emphasized that samples should also be of average plants as opposed to small or large ones.

Another thing to remember, Bogash stated, is to be consistent in time of day you are collecting and weather conditions. “This matters because plants photosynthesis levels vary with sunlight levels and temperature,” he explained. Working with a lab with less than a four-day turnaround on results will also help, he added.

3). Growers should also test their soil and apply plow down nutrients to 30% to 50% of soil test recommendations. Plow down nutrients are applied to the soil and then plowed under. “You need to begin with good nutrient levels as it is very challenging to fertigate everything that plants need if the soil is deficient,” he explained.

4). Growers also need to know their water’s pH level, alkalinity, nitrogen (N), phosphorus (P), and potassium (K) levels. “Water pH and alkalinity are the most important as they directly impact nutrient uptake,” said Bogash. “N, P, and K levels can be important if there are significant levels as they impact nutrient application levels, and, if too high, can stimulate algae blooms which can clog drip irrigation systems.”

In addition, growers should be aware of the difference between well water, spring water, and the water that comes from a stream or a pond as these natural sources of water are exposed to the elements and thus change at a much more rapid pace than other water supplies.

5). As the results of the tests come in, growers should plot the changes in N, K, and P, as well as calcium (Ca) and magnesium (Mg) over the course of the season. Growers should also adjust the program as necessary to keep key nutrients up to specs, Bogash said. The ideal amounts from flowering onward include levels of N around 4%, K at a little more than 3%, P at 1%, Ca at 3%, and Mg at .8 to 1%.

High N can aggravate a yellow shoulder problem and make soft fruit, he warned. Low K at flower fertilization will cause yellow shoulder. Growers should use high K fertilizers along with foliar applications and supplementary Ca, Mg, and P as needed based on tissue testing, he added.

6). Ripening is the next phase. Tomato fruit contain substantial amounts of potassium, since potassium ions are responsible for water movement across membranes. Therefore, growers need to make sure there’s plenty of it be-cause if it is short supply, plants cannot move carbohydrates and other molecules as needed.

“Potassium is very important for sugar movement, so without good management, the flavor will suffer,” he concluded.

“IF you’re going to mess up a crop, it’s tomatoes. They’re like the canary in the coal mine.”
Those were the opening words of Steve Bogash, regional horticultural educator at Penn State University, to a roomful of growers at the Ohio Produce Growers & Marketers Association Congress in January.
Bogash has produced more than 300 tomato varieties in trials. In spite of his opening comments, Bogash has met with many successes in tomato production and said that one of the best varieties he has worked with is BrandyBoy from Burpee Seeds.
“The flavor of this tomato is tremendous,” he said.  In addition, “Rather than getting three to five fruit before disease sets in, as is the case with the variety’s parent, BrandyWine, BrandyBoy is a hybrid that produces a lot of tomatoes long term, due to high resistance qualities and the ability to grow multiple fruit per cluster.”
Those successes are not without difficulties, however, as blossom end rot, yellow shoulders, uneven ripening, and radial cracking have occurred on Brandyboy and any tomato that does not receive proper nutrition.

Planning for Success
In order to maximize success producing virtually any variety of tomato, Bogash presented some guidelines growers should follow.
1). First, he said, is to use varieties with disease-resistant qualities. Bogash has had success with BHN 589 (BHN Seed Co.), Scarlet Red (Harris Moran Seed Co.), and the previously mentioned BrandyBoy. Noting that there are many other good tomatoes on the market, Bogash said these varieties are the ones that he has had the most success with to date.
2). Growers should also be aware of what to test and when. “You have to test regularly,” he emphasized, “and know your soil or potting media.”
Bogash told the audience to test soil before planting, again at the onset of heavy flowering, and a final time at the first and second stage of green fruit. Testing at all stages of growth is necessary to monitor nutrient removal.
“Tissue testing should also be done at the onset of flowering and every two weeks thereafter in order to monitor nutrient uptake,” he explained. This will help growers understand how to adjust their fertility programs to ensure optimal growth.
Growers should then continue testing every two weeks until the last fruit has sized up. When taking tissue tests, Bogash said growers should be sure to test the correct plant parts. These include collecting 12 to 15 of the most recently mature leaves including the petiole. He emphasized that samples should also be of average plants as opposed to small or large ones.
Another thing to remember, Bogash stated, is to be consistent in time of day you are collecting and weather conditions. “This matters because plants photosynthesis levels vary with sunlight levels and temperature,” he explained.
Working with a lab with less than a four-day turnaround on results will also help, he added.
3). Growers should also test their soil and apply plow down nutrients to 30% to 50% of soil test recommendations. Plow down nutrients are applied to the soil and then plowed under. “You need to begin with good nutrient levels as it is very challenging to fertigate everything that plants need if the soil is deficient,” he explained.
4). Growers also need to know their water’s pH level, alkalinity, nitrogen (N), phosphorus (P), and potassium (K) levels. “Water pH and alkalinity are the most important as they directly impact nutrient uptake,” said Bogash. “N, P, and K levels can be important if there are significant levels as they impact nutrient application levels, and, if too high, can stimulate algae blooms which can clog drip irrigation systems.”
In addition, growers should be aware of the difference between well water, spring water, and the water that comes from a stream or a pond as these natural sources of water are exposed to the elements and thus change at a much more rapid pace than other water supplies.
5). As the results of the tests come in, growers should plot the changes in N, K, and P, as well as calcium (Ca) and magnesium (Mg) over the course of the season. Growers should also adjust the program as necessary to keep key nutrients up to specs, Bogash said. The ideal amounts from flowering onward include levels of N around 4%, K at a little more than 3%, P at 1%, Ca at 3%, and Mg at .8 to 1%.
High N can aggravate a yellow shoulder problem and make soft fruit, he warned. Low K at flower fertilization will cause yellow shoulder. Growers should use high K fertilizers along with foliar applications and supplementary Ca, Mg, and P as needed based on tissue testing, he added.
6). Ripening is the next phase. Tomato fruit contain substantial amounts of potassium, since potassium ions are responsible for water movement across membranes. Therefore, growers need
to make sure there’s plenty of it be-cause if it is short supply, plants cannot move carbohydrates and other molecules as needed.
“Potassium is very important for sugar movement, so without good management, the flavor will suffer,”
he concluded.

“IF you’re going to mess up a crop, it’s tomatoes. They’re like the canary in the coal mine.”

Those were the opening words of Steve Bogash, regional horticultural educator at Penn State University, to a roomful of growers at the Ohio Produce Growers & Marketers Association Congress in January.

Bogash has produced more than 300 tomato varieties in trials. In spite of his opening comments, Bogash has met with many successes in tomato production and said that one of the best varieties he has worked with is BrandyBoy from Burpee Seeds.

“The flavor of this tomato is tremendous,” he said. In addition, “Rather than getting three to five fruit before disease sets in, as is the case with the variety’s parent, BrandyWine, BrandyBoy is a hybrid that produces a lot of tomatoes long term, due to high resistance qualities and the ability to grow multiple fruit per cluster.”

Those successes are not without difficulties, however, as blossom end rot, yellow shoulders, uneven ripening, and radial cracking have occurred on Brandyboy and any tomato that does not receive proper nutrition.

 

Planning for Success

In order to maximize success producing virtually any variety of tomato, Bogash presented some guidelines growers should follow.

1). First, he said, is to use varieties with disease-resistant qualities. Bogash has had success with BHN 589 (BHN Seed Co.), Scarlet Red (Harris Moran Seed Co.), and the previously mentioned BrandyBoy. Noting that there are many other good tomatoes on the market, Bogash said these varieties are the ones that he has had the most success with to date.

2). Growers should also be aware of what to test and when. “You have to test regularly,” he emphasized, “and know your soil or potting media.”

Bogash told the audience to test soil before planting, again at the onset of heavy flowering, and a final time at the first and second stage of green fruit. Testing at all stages of growth is necessary to monitor nutrient removal.

“Tissue testing should also be done at the onset of flowering and every two weeks thereafter in order to monitor nutrient uptake,” he explained. This will help growers understand how to adjust their fertility programs to ensure optimal growth.

Growers should then continue testing every two weeks until the last fruit has sized up. When taking tissue tests, Bogash said growers should be sure to test the correct plant parts. These include collecting 12 to 15 of the most recently mature leaves including the petiole. He emphasized that samples should also be of average plants as opposed to small or large ones.

Another thing to remember, Bogash stated, is to be consistent in time of day you are collecting and weather conditions. “This matters because plants photosynthesis levels vary with sunlight levels and temperature,” he explained.

Working with a lab with less than a four-day turnaround on results will also help, he added.

3). Growers should also test their soil and apply plow down nutrients to 30% to 50% of soil test recommendations. Plow down nutrients are applied to the soil and then plowed under. “You need to begin with good nutrient levels as it is very challenging to fertigate everything that plants need if the soil is deficient,” he explained.

4). Growers also need to know their water’s pH level, alkalinity, nitrogen (N), phosphorus (P), and potassium (K) levels. “Water pH and alkalinity are the most important as they directly impact nutrient uptake,” said Bogash. “N, P, and K levels can be important if there are significant levels as they impact nutrient application levels, and, if too high, can stimulate algae blooms which can clog drip irrigation systems.”

In addition, growers should be aware of the difference between well water, spring water, and the water that comes from a stream or a pond as these natural sources of water are exposed to the elements and thus change at a much more rapid pace than other water supplies.

5). As the results of the tests come in, growers should plot the changes in N, K, and P, as well as calcium (Ca) and magnesium (Mg) over the course of the season. Growers should also adjust the program as necessary to keep key nutrients up to specs, Bogash said. The ideal amounts from flowering onward include levels of N around 4%, K at a little more than 3%, P at 1%, Ca at 3%, and Mg at .8 to 1%.

High N can aggravate a yellow shoulder problem and make soft fruit, he warned. Low K at flower fertilization will cause yellow shoulder. Growers should use high K fertilizers along with foliar applications and supplementary Ca, Mg, and P as needed based on tissue testing, he added.

6). Ripening is the next phase. Tomato fruit contain substantial amounts of potassium, since potassium ions are responsible for water movement across membranes. Therefore, growers need

to make sure there’s plenty of it be-cause if it is short supply, plants cannot move carbohydrates and other molecules as needed.

“Potassium is very important for sugar movement, so without good management, the flavor will suffer,”

he concluded.

Topics:

Leave a Reply

Tomatoes Stories
Almond Leaf Sampling
Berries
March 21, 2016
FMC Fungicide Triggers New FRAC Group
Multi-site mode of action classified in new group by Fungicide Resistance Action Committee. Read More
tomato field Gordon
Crop Protection
March 1, 2016
Be On The Lookout For Damaging Diseases Of Tomatoes 
In the Mid-Atlantic region, wet conditions have affected tomato production, presenting growers with a variety of tough diseases to manage. Read More
nicely sliced tomatoes
Tomatoes
March 1, 2016
International Tomato Conference To Cover Trends Toward 2020
Keynote will address production and consumption of tomatoes in an EU and world perspective. Read More
tomato field Gordon
Disease Control
February 16, 2016
Learn To Use Late Blight Tool For Potatoes And Tomatoes
Cornell workshop to highlight how tool uses temperature, relative humidity, rainfall information as well as the specific location of your farm. Read More
Hazera Seeds will highlight Tinty, a unique red pointed cabbage, at the upcoming Fruit Logistica in Germany.
Leafy Vegetables
January 13, 2016
New Pointed Red Cabbage, Tomato To Be Showcased At Fruit Logistica
Hazara Seeds to present new varieties at the trade show in Germany. Read More
nicely sliced tomatoes
Insect Control
December 21, 2015
Revised Label For Nimitz Nematicide Ties In Tomatoes
Removal of direct-seeding restriction reinstates the crop back onto the approved fruiting vegetables list. Read More
2015 Florida Ag Expo fresh veggies for cooking demo
Production
November 12, 2015
Adding Value To Your Vegetable Crop Can Help Counter Costs
Creating demand necessary as the price of doing business continues to increase. Read More
The Latest
Berries
April 27, 2016
New Herbicide For Tomatoes, Strawberries
The product from Helm Agro US is registered to control more than 100 broadleaf, grass, and sedge species. Read More
Tomatoes
April 11, 2016
International Processing Tomato Symposiu…
Event to cover a variety of topics including assessment of quality, focusing on color, Brix, and fungal contamination measurement. Read More
Farm Management
March 23, 2016
Vegetable Surfaces’ Microscopic St…
University of Illinois researchers studied the ability of pathogenic viruses to adhere to fresh produce surfaces. Read More
Berries
March 21, 2016
FMC Fungicide Triggers New FRAC Group
Multi-site mode of action classified in new group by Fungicide Resistance Action Committee. Read More
Crop Protection
March 1, 2016
Be On The Lookout For Damaging Diseases …
In the Mid-Atlantic region, wet conditions have affected tomato production, presenting growers with a variety of tough diseases to manage. Read More
Tomatoes
March 1, 2016
International Tomato Conference To Cover…
Keynote will address production and consumption of tomatoes in an EU and world perspective. Read More
Disease Control
February 16, 2016
Learn To Use Late Blight Tool For Potato…
Cornell workshop to highlight how tool uses temperature, relative humidity, rainfall information as well as the specific location of your farm. Read More
Leafy Vegetables
January 13, 2016
New Pointed Red Cabbage, Tomato To Be Sh…
Hazara Seeds to present new varieties at the trade show in Germany. Read More
Insect Control
December 21, 2015
Revised Label For Nimitz Nematicide Ties…
Removal of direct-seeding restriction reinstates the crop back onto the approved fruiting vegetables list. Read More
Production
November 12, 2015
Adding Value To Your Vegetable Crop Can …
Creating demand necessary as the price of doing business continues to increase. Read More
Production
October 29, 2015
5 Trends In Protected Ag Or Controlled E…
Take these trends into consideration if you plan to grow under cover or want to expand your operation. Read More
Tomatoes
October 23, 2015
Worldwide Congress On Processing Tomatoe…
Focus will be on global economic trends, future markets, production costs, water, and more. Read More
Disease Control
October 22, 2015
A Keen Eye Can Help You Spot Edema On Yo…
Learn how to identify, the contributing factors of, and management methods for this common disease of vegetables. Read More
Tomatoes
October 21, 2015
5 Juicy Tomatoes Florida Growers Should …
The tomato is a staple specialty crop for Florida. New varieties developed by leading seed manufacturers are enabling more growers to Read More
Tomatoes
October 9, 2015
Longtime South Florida Tomato Producer P…
Nathan Esformes, co-founder of Pacific Tomato Growers, succeeded in the agriculture industry for more than 60 years. Read More
Production
September 28, 2015
New Hampshire Researchers Develop New Ch…
The tomato is designed to grow in hanging baskets in greenhouses. Read More
Tomatoes
September 25, 2015
Chapter 11 Proceedings Help Troubled Flo…
Bankruptcy court confirms sale of 1,151 acres in auction that clears way for continued operations at Grainger Farms. Read More
Crop Protection
September 23, 2015
Beneficial Insect Causes Problems On Tom…
The tomato bug may control whitefly populations in greenhouses but it is wreaking havoc in tomato fields in South Texas. Read More
[gravityform id="62" title="false" description="false"]