When is a Good Time to Start Early Season Irrigation of Nut Trees?

When is a Good Time to Start Early Season Irrigation of Nut Trees?

This pressure chamber is ready for use in a Northern California walnut orchard. (Photo: Carolyn Haynes, UCCE Tehama County)

One of the motivations for making good water management decisions early in the growing season is to reduce the risk of root and crown diseases that can eventually kill almond, walnut, and other tree species. These diseases need three elements to infect and damage a tree: a susceptible host plant, a pathogen, and favorable environmental conditions.

Early season water management influences the environment where roots grow by affecting soil temperature and aeration and can be pivotal in how much tree decline actually occurs. Trees are expensive. The money and effort spent to establish them is lost, more costs lie ahead to replace them, and production is lost.

Advertisement

Only One Direct Indicator

Each season you need to decide when to start irrigating. It can be difficult to choose the best time to start. There are a lot of different information sources you can use to make this decision. You can copy practices that you observe around you, evaluate soil moisture, consider the weather and evapotranspiration loss of the crop (ETc), or take a plant-based approach. Using multiple information sources is highly recommended. However, utilizing the plant-based monitoring approach of stem water potential readings with a pressure chamber has a distinct advantage over the others.

Top Articles
Indoor Farming Insider Talks About Evolution of the Sector

The pressure chamber directly determines the water status that the trees experience, while the other sources, such as ET or soil moisture, although helpful, are indirect. The pressure chamber gauges the amount of positive gas pressure (in pressure units, e.g., bars) required to balance the level of water tension in a plant sample (e.g., leaf). The water tension level in a leaf expresses the degree of effort used to pull water all the way through the tree from the soil.

Relying on an indirect information source, particularly an approach like beginning irrigation when your neighbor does, when the surface soil has dried out, or irrigating on the first hot day, could result in irrigating too soon. To learn more about the pressure chamber, stem water potential, the fully watered baseline, how to go about getting equipment and taking measurements, check out our series online.

Flexibility To Delay Irrigation

Research in a walnut orchard in California’s Tehama County has found that start of irrigation can be delayed by waiting for mild to moderate water status when measured with the pressure chamber. Some observed benefits have been a minimum 10% reduction in energy for pumping, less tree stress during harvest season, and no impact on edible kernel yield. A managed (informed) delay in the start of irrigation may allow for deeper root activity late in the season. Possibly, an irrigation strategy that starts the irrigation season too early promotes a shallow root system at the expense of deeper root development.

University of California (UC) researchers will be repeating this investigation in almonds in the Northern Sacramento Valley. Before UC researchers begin to see results from this work in almond, it is best to be cautious in choosing a level of stem water potential with the pressure chamber to trigger the first irrigation of the season. From everything we currently understand, waiting to apply first irrigation for until a tree water status reaches -2 bars below the fully watered baseline represents a low-risk irrigation decision that could benefit long-term tree and root health.

When is a Good Time to Start Early Season Irrigation of Nut Trees?


Here’s an installation of soil moisture sensors with a datalogger in progress. (Photo: Carolyn Haynes, UCCE Tehama County)

Monitoring Evapotranspiration

If using the pressure chamber isn’t appealing, or a second source of information is desired, monitoring the weather and evapotranspiration (ET) crop losses is an option. This method is sometimes called a “water budget,” because it is similar to budgeting money. Soil water storage in the crop root zone is equal to a balance in a checking or savings account. ET is much like a debit from the account and significant rainfall or irrigation equates to a deposit or credit into the account. Water budgeting approximates the soil moisture level in the root zone rather than measuring it with soil moisture sensors.

Weekly ET reports are available online during the irrigation season, or you can receive them weekly by email. ET is estimated based on real-time weather measurements at regional California Irrigation Management Information System (CIMIS) weather stations. Estimates are for trees with at least 50% canopy cover and need to be adjusted downward for smaller trees. Each report provides a real-time estimate of ET in inches for the past seven days, an estimate for the next seven days, and keeps a running total for the season. Accumulations begin at leaf-out for each crop, which enables their use to help decide when to begin the irrigation season. It is important to know the hourly water application rate (inches/hour) of your irrigation system.

Using an example from the 2018 season, we followed each weekly report from Feb. 16 to May 3 for the Gerber South CIMIS weather station. It showed that cumulative ET for almonds was 7.51 inches, while cumulative rainfall for the same period was 5.26 inches and resulted in a 2.25-inch soil moisture deficit. This assumed that all of the rainfall was effectively used in the orchard, which is a site-specific consideration that needs to be adjusted accordingly in the water budget. Dividing this 2.25-inch soil moisture deficit by a water application rate of 0.07 inches per hour (i.e., an almond orchard with 124 trees per acre with one 16 gph microsprinkler per tree) is equal to 32 hours of irrigation, or the equivalent of two, 16-hour irrigation sets that suit utilities’ off-peak rates. Choice of set length is a site-specific consideration depending on the irrigation system and soil type; however, it is best to minimize ponding conditions that can starve roots of oxygen and provide favorable disease conditions.

The previous example provides context of how this deficit relates to the irrigation system’s capacity. It is the irrigation manager’s decision whether to delay the beginning of irrigation to protect tree and root health, begin irrigation by partially refilling the soil moisture deficit (i.e., one 16-hour irrigation set), or begin irrigation and fully replace the soil moisture deficit. If this information were paired with the pressure chamber measurements and the stem water potential measurements were still within -2 bars of the fully irrigated baseline, the manager may have more peace of mind about continuing to delay the first irrigation.

Monitoring Soil Moisture Depletion

If neither the pressure chamber nor water budgeting appeal to you, or you are looking for a backup to one or both of these methods, directly monitoring soil moisture is an option. Checking soil moisture by hand is a very basic method to evaluate soil moisture conditions. There are many online stores that carry soil augers. The USDA-National Resource Conservation Service also offers a nicely prepared publication with color pictures titled “Estimate Soil Moisture By Feel and Appearance.”

 

0