Early-Season Scouting Tips for Sweet Corn Growers
Some pests are sporadic in nature and only become problems when conditions are right. This year’s wet spring and big storms have provided perfect conditions for black cutworm and true armyworm. The combination of weather fronts carrying moths to Michigan and wet ground delaying weed control efforts means there is a higher risk of black cutworm and true armyworm damage appearing in sweet corn fields this year.
Black cutworm can also feed on a wide range of vegetable seedlings and transplants, including tomatoes, vine crops, and cole crops.
The first factor in determining if these moths may be in your area laying eggs will be your location. The spread of the moths can be patchy even if they are present in high numbers in some areas.
One way to determine if significant flights have occurred in your area is to trap pests yourself or keep tabs on traps kept by others. MSU Extension educators working in field and vegetable crops have been trapping for both pests across Michigan this spring. Trapping tells you when there have been “intensive captures,” which means there are enough moths captured to warrant scouting at a later date. After the intensive capture, degree-days are used to predict when larvae will potentially be out causing damage in fields. This year, there have been sizeable captures of moths in bucket traps monitored by Extension educators from around Michigan.
If there is reason to believe major black cutworm or true armyworm flights have occurred in your area, the next step is evaluating the risk based on your specific location and cultural practices. Black cutworm is most likely to cause significant injury in fields with reduced tillage practices, and where large populations of broadleaf weeds are present prior to planting.
True armyworm infestations are most likely to be seen in no-till corn planted into grass and in corn that borders mature wheat. They also are more common in fields that border cereal grains, grassy ditches and orchard floors.If there are no trapping efforts nearby, a good tool for black cutworm is Insect Forecast, which predicts insects flights based on the weather. There have been moths in my traps during periods the weather model has suggested there would be flights, though without the trap on the ground it is hard to know the intensity of moth flights in your area.
You may have already invested in black cutworm protection when purchasing seed. If you are growing Bt corn, protection may or may not be provided in the variety. Double check to see what pests the variety you are growing provides protection from. Field corn growers can refer to Difonzo’s Handy Bt Trait Table. In sweet corn, varieties that express the Vip3A trait may provide protection. Even in Bt corn, damage may still appear as the plant has to be fed on for the Bt to work. Some seed treatments also provide protection from black cutworm, for example seeds treated with Thiamethoxam may provide suppression.
Scouting and thresholds
If you believe there have been flights in your area and your sweet corn is at risk, do some scouting. Scouting for damage should begin after eggs hatch and then weekly until sweet corn grows beyond the stages most susceptible to damage from each pest (given below). Degree-days can be used in combination with trapping to help determine when to start scouting and what development stage the larvae are in.
If you are located in Michigan, you can check degree-days in your area with MSU Enviroweather station. Simply click degree-day calculations for your region, then select your start date as the date of an intensive capture in your area. This will give you multiple columns — use the degree-day (base 50°F) to get the current degree-day accumulation in your area, as well as the forecasted degree-days over the next couple of days. This will give you an idea of what part of their life cycle both pests are currently in.
For black cutworm, inspect 100 plants in three locations at least weekly in fields where sweet corn has six leaves or less (this scouting practice is recommended by “Sweet Corn Pest Identification and Management” by the Great Lakes Vegetable Working Group and North Central Integrated Pest Management Center). Injury can range from seemingly random feeding throughout the leaf to plants being cut at the base and pulled underground. When these types of injury are present, dig around at the plant base to find the larvae who caused the damage.
Note: If larvae are small (less than 0.5 inch) or large (greater than 0.5 inch), treat for black cutworm damage if small larvae caused 3 percent stand loss or if large larvae caused 5 percent stand loss.
For true armyworm inspect 20 sweet corn plants in five locations per field at least weekly as long as plants are in the seedling and early whorl stages. (according to “Sweet Corn Pest Identification and Management”). True armyworm feeds on leaf edges and likes to hide in the leaf whorl during the day. Treat if more than 35 percent of the plants you scout are infested. Scout again in three days if 10% to 35% of plants are infested.
Treatment for these pests shouldn’t be made unless scouting has occurred—they are patchy enough in distribution where you should always verify larvae are present in your field. Both pests are relatively easy to control if they are detected early, but the bigger the larvae causing the damage, the harder treatment will become. Pyrethroid insecticides are economical and effective for conventional growers, and Bt can provide organic growers control when the larvae are small.